Released the latest EMC DES-5121 exam dumps! You can get DES-5121 VCE dumps and DES-5121 PDF dumps from Pass4itsure, (including the latest DES-5121 exam questions), which will ensure that your DES-5121 exam is 100% passed! Pass4itsure DES-5121 dumps VCE and PDF — https://www.pass4itsure.com/des-5121.html Updated!
EMC DES-5121 Exam Dumps
[100% free] EMC DES-5121 pdf dumps https://drive.google.com/file/d/14s_haX9mEbvZ2N8dNdvFy1r09rPsGz3H/view?usp=sharing
EMC DES-5121 Practice Test 1-13
QUESTION 1
When configuring a PBR route-map, what are the configurable “SET” options?
A. set ip source, set ip next-hop, and set ip default next-hop
B. set ip next-hop, set ip source, and set ip precedence
C. set ip next-hop, set ip default next-hop, and set ip precedence
D. set ip source, set ip default next-hop and set ip precedence
Correct Answer: C
QUESTION 2
Which function does a VRRP backup router perform?
A. Sends keepalive advertisements to the other backup routers
B. Processes and response to ARP requests
C. Forwards packets to the Master with a destination IP of the virtual IP address
D. Receives packets with the virtual MAC address as the destination for other backup routers
Correct Answer: D
QUESTION 3
How does the weighted Queue Scheduler prioritize packets?
A. Scheduler prioritizes weighted queues over any strict queues
B. Weights are calculated based on the number of packets
C. Weights are used to calculate the number of bytes
D. Weight is assigned to each port
Correct Answer: C
Reference: click here
QUESTION 4
Which packet characteristics can policy-based routing be configured to match against?
A. TTL, TCP Port, and L3 Packet Length
B. L3 Packet Length, TTL, and 802.1p Priority
C. TCP Port, L3 Packet Length, and 802.1p Priority
D. TCP Port, TTL, and 802.1p Priority
Correct Answer: C
QUESTION 5
Which port security method converts existing dynamically learned MAC addresses on an interface to this mode and not
age out?
A. Static
B. MAC address
C. Sticky
D. Dynamic
Correct Answer: D
Reference: click here
QUESTION 6
You need to configure OSPF on a DNOS 6 switch and have entered the following:
Switch-1(config)# ip routing Switch-1(config)# interface vlan 20 Switch-1(config-if-vlan20)# ip address 10.1.20.1
255.255.255.0
Switch-1(config)# router ospf Switch-1(config-router)# router-id 10.1.1.1
Based on the information referenced above, what is missing from the configuration?
A. area 0 is missing from the ip routing command
B. ip ospf area 0 is missing from the interface vlan 20 section
C. router ospf is missing the routing instance
D. area 0 is missing from the router-id command
Correct Answer: B
QUESTION 7
What is the recommended maximum number of routers, per area, when using OSPF?
A. 50
B. 100
C. 200 D. 255
Correct Answer: A
QUESTION 8
A network administrator is setting up a Class 5 powered device in their network. Which Dell EMC N-Serves switch
model(s) will support this device?
A. N1100P and N2000P
B. N1500P
C. N2000 and N3000P
D. N3000P only
Correct Answer: C
QUESTION 9
Refer to the Exhibit.
A network administrator needs to configure the switches to allow traffic to communicate from Host 1 to Host 2. Which
recommended switch port mode should the interconnecting switch ports be configured?
A. Access
B. Trunk
C. VLAN Stacking
D. Hybrid
Correct Answer: B
QUESTION 10
Which switchport mode is recommended for ports on a Dell EMC N-Series switch with IP phones using voice VLAN?
A. Access
B. Active
C. Hybrid
D. General
Correct Answer: D
QUESTION 11
A user\\’s host with an IP address of 172.16.1.22/24 is attempting to FTP a file from the server with IP address
10.1.1.99; however, they are unable to connect.
Which access-list is preventing this traffic?
A. # ip access-list ACL1 # deny ip any host 10.1.1.99
B. # ip access-list ACL2 # permit ip 172.16.1.0 0.0.0.255 any
C. # ip access-list ACL3 # deny ip any 172.16.2.0 0.0.0.255
D. # ip access-list ACL4 # permit ip host 172.16.1.22 host 10.1.1.99
Correct Answer: A
QUESTION 12
In order to alter a packet\\’s routing direction, which packet layers can policy-based routing use?
A. Transport, Network, Link Layer, and Physical
B. Link Layer, Physical, Presentation, and Session
C. Network, Link Layer, Physical, and Session
D. Application, Transport, Network, and Link Layer
Correct Answer: A
QUESTION 13
When configuring a Dell EMC N-Series switch for VoIP and QoS, what is one QoS setting that ensures voice traffic is
prioritized in the presence of other network traffic?
A. LLDP protocol setting
B. ISDP protocol setting
C. Classification setting
D. VLAN spanning tree setting
Correct Answer: C
Pass4itsure Discount Code 2020
Please read the picture carefully to get 12% off!
P.S.
Passing the EMC DES-5121 exam is no more dream. Free share all the resources: Latest DES-5121 practice questions, latest DES-5121 pdf dumps, DES-5121 exam video learning. Visit https://www.pass4itsure.com/des-5121.html exam dumps with the latest questions.